How to Convert Meters to Feet

Converting Meters to Feet

Learn that one meter equals 3.28 feet. One meter is a length measurement, equal to 3.28 feet. You can test this using a meter stick and 1 foot (12 inch) rulers. Lay the meter stick on the ground, and place the rulers end-to-end next to it. Three rulers (3 feet) will almost be as long as the meter stick. If you add a fourth ruler, you'll be able to measure that extra distance: 0.28 ft, which is a little more than three inches. If you need to be super precise, you can use 1 meter = 3.28084 feet. Because this is extremely close to 3.28 feet, though, you'll almost always want to use the simpler number to make the math easier.

Multiply any meter measurement by 3.28 to convert to feet. Since one meter = 3.28 feet, you can convert any meter measurement into feet by multiplying it by 3.28. If you're not sure how to do this, read about multiplying decimals. Here are some examples. If you want, you can try to do the multiplication on your own and see if you get the right answer: 1 meter x 3.28 = 3.28 feet 5 meters x 3.28 = 16.4 feet 2.7 meters x 3.28 = 8.856 feet

Convert your answer to include inches (optional). For most math problems, all you need is the answer you got in the last step. But if you are curious how long something is, an answer like "8.856 feet" might not mean much to you. Try taking the decimal point and everything after it, then multiplying that by 12 to turn it into inches. This works because 1 foot = 12 inches. It's a conversion just like the one we used for meters and feet. Here are some examples: 3.28 feet = 3 feet + 0.28 feet. Because 0.28 feet x 12 = 3.36, that means 3.28 feet = 3 feet and 3.36 inches 16.4 feet = 16 feet + 0.4 feet. Because 0.4 feet x 12 = 4.8, that means 16.4 feet = 16 feet and 4.8 inches 8.856 feet = 8 feet + 0.856 feet. Because 0.856 feet x 12 = 10.272, so 8.856 feet = 10 feet and 10.272 inches

Converting Square Meters to Square Feet

Understand square meters. Square meters, often written as m, are a measurement of area. Area is used to measure two-dimensional surfaces, like the floor of a room, or a sports field. One square meter is a unit of area equal to a square that is one meter long and one meter wide. You can convert units of area only to other units of area, never to units of length. In this method, we'll convert from square meters (m) to square feet (ft). A square foot is a unit of area equal to a square one foot long and one foot wide.

Understand why you need to use square feet. Converting from square meters to square feet works fine. It's like saying "I know four of these big squares will cover this floor. How many small squares will?" You can't convert to units measured with a ruler (like ordinary feet), because that's like asking "How long of a ruler would I need to cover the floor?" No matter how long a straight ruler gets, it can't cover a floor.

Multiple square meters by 10.8 to get square feet. One square meter can fit 10.8 square feet inside it. This means you can multiply any m measurement by 10.8 to get the same measurement in ft. If you need to be extra precise, multiply by 10.764 instead.

Converting Cubic Meters into Cubic Feet

Understand cubic meters. A cubic meter is written m. It is a unit of volume, which measures space in three dimensions. You can use cubic meters to measure the amount of air in a room, or the amount of water in an aquarium. A cubic meter is an amount of volume equal to a cube one meter long, one meter wide, and one meter tall. Similarly, a cubic foot (ft) is equal to a cube one foot long, one foot wide, and one foot tall.

Multiply cubic meters by 35.3 to get cubic feet. One cubic meter can fit 35.3 cubic feet inside of it. Notice how this number is bigger than the conversion used above for m or plain old meters? That's because you're multiplying the difference three times when you're in three dimensions. The cubic meter is 3.28 times longer than the cubic foot, but it's also 3.28 times wider and 3.28 times taller. 3.28 x 3.28 x 3.28 = 35.3, so the cubic meter is 35.3 times bigger by volume than the cubic foot. To be more precise, multiply by 35.315 instead.