Polishing Silver with Aluminum Foil, Baking Soda, and Vinegar
Boil a pot of water. For this method of polishing silver, you will be pouring boiling water over a bowl full of other tarnish-fighting ingredients. Depending on the amount and sizes of the silver you are polishing, you will need to boil more water; just enough to completely cover your items.
Prep your bowl. Get a heat safe bowl and cut a piece of aluminum foil to fit the inside. Lay the aluminum foil shiny side up along the interior of the bowl. If you need to use multiple sheets in order to fill the whole thing, feel free to do so.
Add your ingredients. Measure out 1 tablespoon of baking soda, 1 tablespoon of salt, and ½ cup of white vinegar. Add these one at a time into the bowl, creating a fizzy mixture on top of the aluminum foil. If you are polishing several larger items at once, you may need to double these measurements.
Mix the solution. Use a spoon to mix together all the ingredients in the bowl so that they completely dissolve. Leaving chunks of baking soda or salt in the mix could scratch or dull your silver.
Add your water. When your water has reached a boil, slowly pour it into the mixture. Use your spoon to mix the solution a bit more to make sure that it is thoroughly combined.
Place in your items of silver. Slowly drop in each piece of silver, using tongs if necessary to avoid getting burned. Allow the silver to sit for a few minutes in the solution, flipping so that both sides are exposed halfway through.
Pick out the silver. Use tongs to pick each piece of silver out of the water, and place it onto your polishing cloth. Let it sit for a moment to cool slightly, and then polish the entire area of the silver with the cloth. Focus on previously tarnished areas to make sure that they are completely clean.
Polishing with a Mild Detergent
Fill a bowl with warm water and detergent. You will only need enough water to fully cover the silver, so your bowl may not need to be filled very deeply. Use a mild dish detergent to wash your silver. Pour a small squeeze of the detergent into the water and slosh it around with your hands a bit to mix it well. Avoid using any soaps that have ammonia or phosphate.
Add your silver. Place all your silver items into the bowl. Use a brand new sponge or soft toothbrush to gently scrub off dirt and tarnish on your items. Don’t allow them to soak for too long, to prevent water spots.
Rinse off the detergent. Take each piece of silver out of the soapy bowl of water individually. Run it under warm or cool water to rinse all the soap off.
Dry the silver. Use a dry microfiber towel or cloth to dry off all the water. Be sure to catch water hidden in cracks and crevices in jewelry or silverware.
Give your silver a polish. Use a silver polishing cloth or small microfiber cloth to rub off any tarnished areas that are still visible. Don’t use any fabric or material with heavy or stiff fibers, as these will scratch and dull your silver.
Polishing Silver with a Store Bought Polish
Choose a silver polish. There are two primary types of silver polish available on the market: a liquid, spray on, or cream silver polish. The former is better for regular polishings and minor tarnish while the latter is best for heavy tarnish and larger silver products.
Apply the polish. If you are using a liquid polish, shake the bottle well before applying. Get some of the liquid or cream on a clean polishing cloth, and wipe it onto the surface of the silver. Allow it to set for 1-2 minutes depending on the amount of tarnish.
Polish the silver. Use another section of your polishing cloth to wipe the polish around on your silver, focusing on tarnished areas. This is your primary polish session, so get off any unwanted marks or spots at this point.
Rinse off the polish. Run your silver under lukewarm or cool water to wash off the polish. Use a clean sponge or cloth to remove all traces of the chemicals and completely clean the silver.
Completely dry the silver. Use a new silver polishing or microfiber cloth to dry the silver. Do this immediately after rinsing to avoid the formation of new water spots on the metal. Give a final polish to your silver, and you’re done!
Using Other Household Items to Polish Silver
Try Alka-seltzer. This classic stomach-settler is useful for more than just clearing up indigestion; polish off dirty or tarnished silver by dropping it into a cup of the fizzy liquid. Allow the silver to soak for a few minutes before removing and polishing with a microfiber cloth. Voila! Your silver is sparkly and good as new.
Use an ammonia solution. Fill a bowl with ½ cup of ammonia and 1 cup of warm water, and then drop your silver in. Leaving the silver to soak for ten minutes will dissolve the grime and exposure that tarnishes your silver. Remove from the solution, rinse with clean warm water, and dry off and polish with a polishing rag.
Dip your silver in ketchup. Not nearly as appetizing as fries with ketchup, silver dunked in this tomato-based paste will be returned to its former glory after a brief soak. Fill a small bowl with ketchup and place your silver in the sauce. Use a toothbrush to scrub a wider surface with the condiment or to reach hard to reach detailed areas. Leave the ketchup on for only a few minutes, and then rinse off with fresh water and polish with your microfiber cloth.
Scrub your silver with toothpaste. Silver grills aren’t the only things that can be cleaned up with toothpaste. Use a clean, soft toothbrush and a bit of toothpaste and softly scrub your silver. Rinse off the toothpaste after your scrub and dry it off with your polishing rag.
Use window cleaner. The chemicals in window cleaner work great for polishing metal in addition to glass. Spray a bit of your favorite window cleaner onto a microfiber cloth and wipe down your silver with it.
Comments
0 comment